mobile phone Car Holder
Usage Instructions :
Clean the surface of installation area to remove any dust that can interface the adhesive of Gel PAD
IF the adhesive does not adhere to surface of the device . this may be due to dust simply rinse the pad with water allow to thoroughly dry before to stall again .
1. carefully remove the entire plastic film off back side of small pad .
2. Adhere the small gel pad evenly on the face of the metal car mount
3. carefully remove the entire plastic film off the smooth side of lager gal pad and place on the desire location on your dashboard.
4. carefully remove the plastic film of the front side of the small gel pad and position your device by centering it .
5. remove the plastic film from the top of the lager gel pad , then center the metal car mount
directly on the large gel pad.
THE Device can be Angle or ROTATE 360 degree rotate metal bracket . and its inclination can be adjustable from 1 to 90degree
Buffer driving vibration to protect the electronic equipment .
Two organic Silicon rubber mats , with high quality . strong and powerful absorption ..
Durable , Washable ...
easy to simple installation
Material : PU + metal stand
size : 100 x 120mm ( bottom pad ) , 100 x 70mm attach surface
OEM / ODM service acceptable.